Author Topic: Briggs and Sratton Coil  (Read 4017 times)

AUSDOK

  • Member
  • *
  • Posts: 1064
Briggs and Sratton Coil
« on: 23 October, 2014, 09:16:29 pm »
Hi our  restoration club is restoring a Briggs and Statton Engine coupled to a 12 volt generator .The coils is shot and we are needing another one. On the coil is printed 8967(?5)A 50 I . The mode is NP type 205757. The coil is mounted with 4 bolt hoes and has 3 leads. If any body has one that they are willing to sell. Please pm me. cheers Rudy

jopeter

  • Member
  • *
  • Posts: 544
Re: Briggs and Sratton Coil
« Reply #1 on: 24 October, 2014, 09:30:33 am »
Rudy ,that sounds like a Pioneer Gen Set ,sometimes known as Pincor. I have one but getting bits for the original B&S  N type proved pretty hard so I fitted a Villiers Mk 12.

AUSDOK

  • Member
  • *
  • Posts: 1064
Re: Briggs and Sratton Coil
« Reply #2 on: 25 October, 2014, 05:42:38 am »
Thanks for the reply ,I will keep looking. cheers Rudy

cobbadog

  • Member
  • *
  • Posts: 3804
  • Buzacott Farm Pumper.
Re: Briggs and Sratton Coil
« Reply #3 on: 27 October, 2014, 05:09:35 pm »
Check out some of the old mowers as well, B&S would have used similar or same parts.
Cheers, John & Dee. Coopernook. NSW.

AUSDOK

  • Member
  • *
  • Posts: 1064
Re: Briggs and Sratton Coil
« Reply #4 on: 28 October, 2014, 06:28:11 am »
Ok everybody stop looking ,I contacted an old friend and he had one on the shelf .It is amazing what you can find sometimes. cheers Rudy