Author Topic: Chasing a pulley for a Sundial 2HP engine...  (Read 3588 times)


  • Member
  • *
  • Posts: 11
Chasing a pulley for a Sundial 2HP engine...
« on: 02 July, 2010, 12:20:50 pm »
Hi all. Does anyone know where I can get a flat-belt drive pulley for my 2HP Sundial type A engine? My research tells me the standard one offered is 6-1/2" diameter, with part number X839 moulded in it. There is also a 7-1/2" unit, part number M353, a 9-1/2", part M354 and a 4-1/2", part M351. They all have a 4" wide face and three mounting lugs with holes at the flywheel end. The centres of the holes are approx. 2" from the centre of the crank and from the centre of any hole to the centre of another is 3-1/8" in a straight line. I prefer a larger pulley but would be interested in any size. If you have anything like this, please let me know with an idea of price. Direct email: Thanks and cheers ... Frank