Author Topic: Tool 1  (Read 54587 times)

rustyengines

  • Member
  • *
  • Posts: 2686
  • Townsville North Queensland
    • Southern Cross Register
Re: Tool 1
« Reply #135 on: 06 September, 2016, 11:36:53 am »
The smallest 'hog ring pliers' I have seen
Southern Cross Engines, Lawn Mowers and old tools * TOWNSVILLE

rustyengines

  • Member
  • *
  • Posts: 2686
  • Townsville North Queensland
    • Southern Cross Register
Re: Tool 1
« Reply #136 on: 06 September, 2016, 11:38:53 am »
One more what were these called
Ian
Southern Cross Engines, Lawn Mowers and old tools * TOWNSVILLE

bigmoot

  • Member
  • *
  • Posts: 789
Re: Tool 1
« Reply #137 on: 06 September, 2016, 03:54:46 pm »
GDAY we used these when i worked at T BOOTS AT WINDSOR NSW BOOT AND SHOE MAKERS regards bigmoot.
hawkesbury n.s.w   hornsbys/listers/associated/triumph/sundexs/
sundial/fairbanks z 's/condor/inter m's/ronnys/nuffield tractor/howard 2000/southern cross's.

Scott

  • Member
  • *
  • Posts: 2053
  • From the thriving metropolis known as Warwick QLD
Re: Tool 1
« Reply #138 on: 06 September, 2016, 05:47:07 pm »
One more what were these called
Ian
Hello Ian
They're for wheel weights aren't they?

Cheers Scott

bigmoot

  • Member
  • *
  • Posts: 789
Re: Tool 1
« Reply #139 on: 06 September, 2016, 07:25:32 pm »
THIS IS WHAT THEY LOOK LIKE REGARDS BIGMOOT.
hawkesbury n.s.w   hornsbys/listers/associated/triumph/sundexs/
sundial/fairbanks z 's/condor/inter m's/ronnys/nuffield tractor/howard 2000/southern cross's.

rustyengines

  • Member
  • *
  • Posts: 2686
  • Townsville North Queensland
    • Southern Cross Register
Re: Tool 1
« Reply #140 on: 09 September, 2016, 12:27:32 pm »
Some more
The one in the middle is ???
I have had  good look at it the hook part and it is square to the other surface  no file marks no hacksaw marks can be seen so if home made they did a good job BUT why that shape
Ian
Southern Cross Engines, Lawn Mowers and old tools * TOWNSVILLE

Scott

  • Member
  • *
  • Posts: 2053
  • From the thriving metropolis known as Warwick QLD
Re: Tool 1
« Reply #141 on: 09 September, 2016, 03:43:22 pm »
Hello Ian
have you got an old pushbike around the place? if you have, try that funny spanner on the headstock bearing. It might fit. Probably won't.

Cheers Scott

tractorfan

  • Member
  • *
  • Posts: 115
Re: Tool 1
« Reply #142 on: 10 September, 2016, 08:32:40 am »
The spanner on the far right, in the first photo, is a BSA motorcycle carburettor spanner. Used on the WM20's etc.

cobbadog

  • Member
  • *
  • Posts: 3250
  • Buzacott Farm Pumper.
Re: Tool 1
« Reply #143 on: 10 September, 2016, 04:13:53 pm »
I also think that the same spanner on the far right is also another push bike spanner like many if not all of the others.
Cheers, John & Dee. Coopernook. NSW.

tractorfan

  • Member
  • *
  • Posts: 115
Re: Tool 1
« Reply #144 on: 10 September, 2016, 06:50:25 pm »
Quote
I also think that the same spanner on the far right is also another push bike spanner like many if not all of the others.

It's BSA part No. 15-8945. It's specific to BSA's.

Google it.

tractorfan

  • Member
  • *
  • Posts: 115
Re: Tool 1
« Reply #145 on: 11 September, 2016, 01:32:06 pm »
The 4th spanner appears to be for either an RV or PT Cooper.

http://ozwrenches.com/cooper.htm

rustyengines

  • Member
  • *
  • Posts: 2686
  • Townsville North Queensland
    • Southern Cross Register
Re: Tool 1
« Reply #146 on: 11 September, 2016, 04:37:46 pm »
"The 4th spanner appears to be for either an RV or PT Cooper."
Good. thanks
Ian
Southern Cross Engines, Lawn Mowers and old tools * TOWNSVILLE

rustyengines

  • Member
  • *
  • Posts: 2686
  • Townsville North Queensland
    • Southern Cross Register
Re: Tool 1
« Reply #147 on: 20 September, 2016, 08:27:40 pm »
Did you lose some tools ?
I have found them
Ian
Southern Cross Engines, Lawn Mowers and old tools * TOWNSVILLE

rustyengines

  • Member
  • *
  • Posts: 2686
  • Townsville North Queensland
    • Southern Cross Register
Re: Tool 1
« Reply #148 on: 06 October, 2016, 08:10:06 pm »
Disston Backsaw
Which dates back to the 1930s or earlier
Note made from 'cast steel' which helps to date it
Ian   
Southern Cross Engines, Lawn Mowers and old tools * TOWNSVILLE

wee-allis

  • Member
  • *
  • Posts: 482
Re: Tool 1
« Reply #149 on: 07 October, 2016, 07:25:57 am »

Love the art work Ian, but what is attached to the wheel in the background of the first photo? Come on give us the "Big picture".

Steve.
If it's old, treat it like gold.
C1300 Inter, 38 Allis B,47 VAK1A David Brown,48 TEA Fergie, 53 Morris Six,  Moruya, Sth coast NSW.