Author Topic: Tool 1  (Read 139604 times)

rustyengines

  • Member
  • *
  • Posts: 2777
  • Townsville North Queensland
    • Southern Cross Register
Re: Tool 1
« Reply #300 on: 12 June, 2018, 06:40:41 pm »
Does anybody have this book (I do) 96 pages of good info all on vintage tools
Ian
Southern Cross Engines, Lawn Mowers and old tools * TOWNSVILLE

Mightgo

  • Member
  • *
  • Posts: 70
Re: Tool 1
« Reply #301 on: 13 June, 2018, 04:51:42 pm »
Hi what would this be

rustyengines

  • Member
  • *
  • Posts: 2777
  • Townsville North Queensland
    • Southern Cross Register
Re: Tool 1
« Reply #302 on: 13 June, 2018, 06:21:33 pm »
The same as the one I put but only 4 threads mine is 6
The chap I got it from said a 'thread chaser' and being involved with a trade I agreed
Go back one page
There is disparagement over what the tool is to me it is a tool for any trade to use not just for one trade
Ian
Southern Cross Engines, Lawn Mowers and old tools * TOWNSVILLE

Scott

  • Member
  • *
  • Posts: 2053
  • From the thriving metropolis known as Warwick QLD
Re: Tool 1
« Reply #303 on: 14 June, 2018, 05:28:13 am »
Hi what would this be
Hello Mr Mightgo
You decide.   ;D
Cheers Scott

Option 1:



Option 2:



Option 3:





rustyengines

  • Member
  • *
  • Posts: 2777
  • Townsville North Queensland
    • Southern Cross Register
Re: Tool 1
« Reply #304 on: 14 June, 2018, 02:32:45 pm »
Mentioned on here was old style threads
Threads and many other engineering threads tool etc were we sorted out and proven many years ago which we still use today
The oldest book I have is a "Mechanical Engineers Handbook" dated 1916 and the threads shown are no different to what we use today
You will see that the USA thread was also known as the ""Sellers thread" and the metric know as the"French thread"
The number of different types of threads and to mentioned them all and used for what would make this post endless
Ian
Southern Cross Engines, Lawn Mowers and old tools * TOWNSVILLE

cobbadog

  • Member
  • *
  • Posts: 3804
  • Buzacott Farm Pumper.
Re: Tool 1
« Reply #305 on: 14 June, 2018, 04:15:28 pm »
I still shake my head when I think of the engine rebuild done on our David Brown Cropmaster. The big end bolts were BSB thread, 26TPI and fortunately wee-allis helped me out with a couple as I managed to damage one.
Cheers, John & Dee. Coopernook. NSW.

klanger

  • Member
  • *
  • Posts: 130
Re: Tool 1
« Reply #306 on: 15 June, 2018, 08:28:53 am »
Looking for any further info about this little hand crank grinder I have.
Was my grandfathers.
All I could find out about it is that it was made by Genko of Germany.


Kevin
Cowes, Phillip Island. Vic
2 x 3hp Record Marine Engines
Ferro 7.5 hp Type K Marine Engine
Ferro 5.5 hp Type E Marine Engine
Ferro 5.5 hp Type F Stationary Engine
2 x Stuart Turner P5M
Simplex 5Hp
Simplex 7/10Hp Twin Cylinder
Detroit Marine Engine 4 HP

Ian

  • Member
  • *
  • Posts: 274
Re: Tool 1
« Reply #307 on: 15 July, 2018, 12:36:51 pm »
Hi All

Have a stab at this one. I know what it is and who would have used it.

Regards

Ian
1 R&T Engine, 1 Simplex Model D Milk Pump, 1 Ajax Milk Pump, 1 Dawn 611 Post Drill, 1 Ajax 1.5 Piston Pump, 1 Goulds Pyramid 3x5 Piston Pump, 1 Cooper 1hp RV, 14 Chooks, 1 Dog, 2 Cats, 1 Wife & 1 Daughter

Ian

  • Member
  • *
  • Posts: 274
Re: Tool 1
« Reply #308 on: 17 July, 2018, 09:15:29 pm »
Hi

So no takers?

Ian
1 R&T Engine, 1 Simplex Model D Milk Pump, 1 Ajax Milk Pump, 1 Dawn 611 Post Drill, 1 Ajax 1.5 Piston Pump, 1 Goulds Pyramid 3x5 Piston Pump, 1 Cooper 1hp RV, 14 Chooks, 1 Dog, 2 Cats, 1 Wife & 1 Daughter

Scott

  • Member
  • *
  • Posts: 2053
  • From the thriving metropolis known as Warwick QLD
Re: Tool 1
« Reply #309 on: 18 July, 2018, 08:01:56 am »
For making cork filters for smokes.
How's that?
Cheers Scott  ;D

wee-allis

  • Member
  • *
  • Posts: 534
Re: Tool 1
« Reply #310 on: 18 July, 2018, 03:15:40 pm »

How about for putting soft copper swages on rope?
If it's old, treat it like gold.
 38 Allis B,50 Morris Six,  Moruya, Sth coast NSW.

Ian

  • Member
  • *
  • Posts: 274
Re: Tool 1
« Reply #311 on: 18 July, 2018, 05:40:06 pm »
NO No No to you both.
1 R&T Engine, 1 Simplex Model D Milk Pump, 1 Ajax Milk Pump, 1 Dawn 611 Post Drill, 1 Ajax 1.5 Piston Pump, 1 Goulds Pyramid 3x5 Piston Pump, 1 Cooper 1hp RV, 14 Chooks, 1 Dog, 2 Cats, 1 Wife & 1 Daughter

cobbadog

  • Member
  • *
  • Posts: 3804
  • Buzacott Farm Pumper.
Re: Tool 1
« Reply #312 on: 19 July, 2018, 09:22:00 am »
What about breaking fingers of someone you dont like ????
Cheers, John & Dee. Coopernook. NSW.

Ian

  • Member
  • *
  • Posts: 274
Re: Tool 1
« Reply #313 on: 19 July, 2018, 10:03:27 am »
Small hint "cork"
1 R&T Engine, 1 Simplex Model D Milk Pump, 1 Ajax Milk Pump, 1 Dawn 611 Post Drill, 1 Ajax 1.5 Piston Pump, 1 Goulds Pyramid 3x5 Piston Pump, 1 Cooper 1hp RV, 14 Chooks, 1 Dog, 2 Cats, 1 Wife & 1 Daughter

Scott

  • Member
  • *
  • Posts: 2053
  • From the thriving metropolis known as Warwick QLD
Re: Tool 1
« Reply #314 on: 19 July, 2018, 12:38:49 pm »
Small hint "cork"
So I'm closer then I realise. Making corks the right size for bottles.
How's that?
Cheers Scott