Author Topic: Tool 1  (Read 139585 times)

cobbadog

  • Member
  • *
  • Posts: 3804
  • Buzacott Farm Pumper.
Re: Tool 1
« Reply #465 on: 17 January, 2020, 02:43:38 pm »
Not a clue as to your new one with those big teeth built into the handles.
Cheers, John & Dee. Coopernook. NSW.

Ian

  • Member
  • *
  • Posts: 274
Re: Tool 1
« Reply #466 on: 20 January, 2020, 12:34:34 pm »
Hi,

Just love the artistry of this tool, any one got any idea what machine it would have come from.   The handle end has two square sockets in it, a smaller one on the inside.

Regards

Ian
1 R&T Engine, 1 Simplex Model D Milk Pump, 1 Ajax Milk Pump, 1 Dawn 611 Post Drill, 1 Ajax 1.5 Piston Pump, 1 Goulds Pyramid 3x5 Piston Pump, 1 Cooper 1hp RV, 14 Chooks, 1 Dog, 2 Cats, 1 Wife & 1 Daughter

rustyengines

  • Member
  • *
  • Posts: 2777
  • Townsville North Queensland
    • Southern Cross Register
Re: Tool 1
« Reply #467 on: 05 June, 2021, 03:45:40 pm »
Just been to the Charters Towers swap meet ans yes found some tools
The last one hade to buy it had No 30 Southern Cross on it BUT what it or part of
Ian
Southern Cross Engines, Lawn Mowers and old tools * TOWNSVILLE

cobbadog

  • Member
  • *
  • Posts: 3804
  • Buzacott Farm Pumper.
Re: Tool 1
« Reply #468 on: 05 June, 2021, 09:34:43 pm »
Any ideas as to the use of the Southern Crrross tool? Are the holes for wire and is the end a chisel or similar?
Cheers, John & Dee. Coopernook. NSW.

rustyengines

  • Member
  • *
  • Posts: 2777
  • Townsville North Queensland
    • Southern Cross Register
Re: Tool 1
« Reply #469 on: 06 June, 2021, 07:45:09 pm »
What I find interesting I have never seen a Shifter/Crescent called an ** Angel Wrench **
Found one on the net https://picclick.com.au/Vintage-Toyota-Motor-Co-Japan-Adjustable-Wrench-Angle-224125243219.html
Hmmmmm I paid $5
Ian
Southern Cross Engines, Lawn Mowers and old tools * TOWNSVILLE

cobbadog

  • Member
  • *
  • Posts: 3804
  • Buzacott Farm Pumper.
Re: Tool 1
« Reply #470 on: 06 June, 2021, 08:51:53 pm »
You need spell check. It is Angle Wrench  not Angel Wrench.
Cheers, John & Dee. Coopernook. NSW.

rustyengines

  • Member
  • *
  • Posts: 2777
  • Townsville North Queensland
    • Southern Cross Register
Re: Tool 1
« Reply #471 on: 07 June, 2021, 10:28:17 am »
John I don't like using my Ph to small to see and has spell check and auto correct and that is where I get caught if I don't notice the ph has changed the word grrrrr
Angel is correct spelling Angle is correct spelling 
I read it then posted oh crap as posting notice the wrong word and as with this site you don't have one second to correct anything unlike some other sites like "Smokstack"
Ian 
Southern Cross Engines, Lawn Mowers and old tools * TOWNSVILLE

cobbadog

  • Member
  • *
  • Posts: 3804
  • Buzacott Farm Pumper.
Re: Tool 1
« Reply #472 on: 07 June, 2021, 09:13:39 pm »
I know what your saying. I must have fat fingers when using this tablet never bother to do it the phone I dont know what would come up on the screen.
Phones are sent to test me and lately my 6 month old A21s certainly is doing that. It will do everything except what I need it to do, make phone calls for work. So sent it off for warranty and shop does not make that decision it goes to Newcastle then accessed then replacement phone sent. SO a week without phone for work was not an option plus going away next week so bought an el cheapo flip phone and what a real challenge it is.
Cheers, John & Dee. Coopernook. NSW.

rustyengines

  • Member
  • *
  • Posts: 2777
  • Townsville North Queensland
    • Southern Cross Register
Re: Tool 1
« Reply #473 on: 18 July, 2021, 02:54:36 pm »
been to the local swap meet (Townsville) found this shifter
Sifters are a grrrr tool to use but this one the harder you push/pull the tighter it gets no more busted knuckles
The screw slides 
Ian
Southern Cross Engines, Lawn Mowers and old tools * TOWNSVILLE

rustyengines

  • Member
  • *
  • Posts: 2777
  • Townsville North Queensland
    • Southern Cross Register
Re: Tool 1
« Reply #474 on: 18 July, 2021, 02:58:01 pm »
What the no pictures
Southern Cross Engines, Lawn Mowers and old tools * TOWNSVILLE

cobbadog

  • Member
  • *
  • Posts: 3804
  • Buzacott Farm Pumper.
Re: Tool 1
« Reply #475 on: 18 July, 2021, 03:45:09 pm »
Nice find Ian and an unusual one too.
Cheers, John & Dee. Coopernook. NSW.

rustyengines

  • Member
  • *
  • Posts: 2777
  • Townsville North Queensland
    • Southern Cross Register
Re: Tool 1
« Reply #476 on: 21 September, 2021, 10:29:09 am »
What is this of
Not a puller as you would pull against the split pin
You could only push with it
Ian
Southern Cross Engines, Lawn Mowers and old tools * TOWNSVILLE

cobbadog

  • Member
  • *
  • Posts: 3804
  • Buzacott Farm Pumper.
Re: Tool 1
« Reply #477 on: 21 September, 2021, 04:11:40 pm »
What about a wire strainer. The point is into the post and the wire around the short arms on the ball then you turn the handle. How's that for a dopey answer?
Cheers, John & Dee. Coopernook. NSW.

tractorfan

  • Member
  • *
  • Posts: 126
Re: Tool 1
« Reply #478 on: 26 September, 2021, 02:59:28 pm »
What about a wire strainer. The point is into the post and the wire around the short arms on the ball then you turn the handle. How's that for a dopey answer?

This is the mechanical part of a shoe stretcher. It's missing the wooden foot-shaped part that fits over the pointy bit.

tractorfan

  • Member
  • *
  • Posts: 126
Re: Tool 1
« Reply #479 on: 26 September, 2021, 03:06:16 pm »
I should learn to add photos. The first is the metal part, the second shows the wooden foot part.