Author Topic: PULFORD COMPRESSOR  (Read 699 times)

AUSDOK

  • Member
  • *
  • Posts: 945
PULFORD COMPRESSOR
« on: 05 November, 2020, 06:18:05 pm »
HI our club as a model 59 approx 1977 model.  We needca top end gasket set .but pulford says the model is too old. Does anybody know where parts may be available.  Thanks Rudy

asw120

  • Member
  • *
  • Posts: 148
Re: PULFORD COMPRESSOR
« Reply #1 on: 05 November, 2020, 09:53:17 pm »
Is it a Pulford - made unit, or Pulford assembled? Could be the ubiquitous Fu-Sheng. A picture of any symbol in the actual casting would help identify it.

Jarrod.

AUSDOK

  • Member
  • *
  • Posts: 945
Re: PULFORD COMPRESSOR
« Reply #2 on: 06 November, 2020, 08:43:20 am »
Hi Jarod Thanks for your reply ,speaking with Pulford they said it is one of theirs ,but as it over 50 years they no longer support it. they did offer a new head for $900 but where unable to provide a gasket set to suit. One of our members has sorted most of the leaks and issues and we think the best option is to put a in tank non return valve in the outlet pipe from the compressor , this will stop any leaks from the valves. We spoke to another compressor company and they where unsure whether it is a viable option at all. Everything else on the compressor is fine . the main issue is a fairly big  leak back through the air intake.  We don't want to scrap the unit if possible. Regards Rudy

asw120

  • Member
  • *
  • Posts: 148
Re: PULFORD COMPRESSOR
« Reply #3 on: 06 November, 2020, 05:26:45 pm »
That sounds like what modern compressors have anyway, so they can be started with a smaller motor. Can't see why it wouldn't work.

Jarrod.

Sssparks

  • Member
  • *
  • Posts: 4
Re: PULFORD COMPRESSOR
« Reply #4 on: 02 January, 2021, 09:51:34 am »
Hi, hope you dont mind me going off topic a bit, I have a pulford 59, 284, G 06. It has melted a piston and I am trying to find a replacement , I haven't contacted Pulfurd direct as yet just trying to get some background information.
Thanks in advance
Sean

cobbadog

  • Member
  • *
  • Posts: 3529
  • Buzacott Farm Pumper.
Re: PULFORD COMPRESSOR
« Reply #5 on: 02 January, 2021, 04:31:43 pm »
Welcome sssparks, if possible a picture may also help those who might have a piston. Remember to compress the image before trying to load it onto the forum.
Cheers, John & Dee. Coopernook. NSW.

Sssparks

  • Member
  • *
  • Posts: 4
Re: PULFORD COMPRESSOR
« Reply #6 on: 17 March, 2021, 08:17:23 am »
Hi all, I have finally taken and compressed a pic of the piston for  the pulford 59 compressor,  if anyone has one or knows of a supplier, I would be very interested,  have other pictures I can add if required,  thanks

cobbadog

  • Member
  • *
  • Posts: 3529
  • Buzacott Farm Pumper.
Re: PULFORD COMPRESSOR
« Reply #7 on: 17 March, 2021, 02:52:07 pm »
Try bills motor Sports on the central coast of NSW
Cheers, John & Dee. Coopernook. NSW.

Sssparks

  • Member
  • *
  • Posts: 4
Re: PULFORD COMPRESSOR
« Reply #8 on: 20 March, 2021, 08:51:05 am »
Thanks for the reply cobbadog, would have any more information on Bills motor sports contact details.  Ihada look online and couldn't find any references to them

Thanks again

Sssparks

  • Member
  • *
  • Posts: 4
Re: PULFORD COMPRESSOR
« Reply #9 on: 20 March, 2021, 08:58:25 am »
Hi all, update on Bills motor " parts", had a better look and added piston to the search.  http://billsmotorparts.com.au
Thanks for the initial lead.